CO2注入井封隔器早期密封失效机制研究

为了揭示CO_2注入井中性能优良的氢化丁腈橡胶封隔器早期密封失效的机制,根据失效井的特征分析以及CO_2的相态特点,提出实现恒定泄压速度的室内实验方法,并对不同CO_2泄压速度下橡胶表面进行形貌观测和力学性能测试分析。结果表明:随着泄压速度的增加,橡胶表面出现了小气泡、大气泡甚至气泡破裂等龟裂现象,橡胶的密封性能均明显变差;注气井突然泄压时,橡胶内部的气体在短时间内无法渗出,其在内外压差作用下会膨胀形成气泡甚至爆裂,这是造成CO_2注入井封隔器早期密封失效的主要原因。为了防止封隔器的早期密封失效,推荐现场井口泄压速度控制在5 MPa/h以内。     

The Photomontage Activity of Postmodernism

For decades now, Douglas Crimp’s landmark 1980 essay ‘The Photographic Activity of Postmodernism’ has shaped our understanding of modernism’s aftermath, at least as it unfolded in North America and Western Europe. Less remembered, however, is the degree to which the procedures of disjunction, copying, appropriation, and outright theft that he highlighted were epitomised not just by contemporary photography, but by photomontage in particular. This article recovers the debates that led critics such as Crimp, Abigail Solomon-Godeau, Christopher Phillips, Benjamin Buchloh and others to turn to photomontage as one of their principal objects of concern in what became known as the postmodern critique of photography. Why was montage tasked to perform this critical function, particularly by people around the journal October who had not otherwise devoted the balance of their writing to photography’s history? The article suggests that these men and women, along with the contemporary artists they foregrounded, manifested what Mary Anne Doane has called a ‘desire for signification’, a reaction in the late 1970s against the mute theatricality of minimalist and conceptual art. Photomontage reintroduced representation to contemporary art and to the canon of art history. But unlike the reemerging illusionism in painting that also manifested this desire, montage guarded against an uncomplicated realism by highlighting and critiquing operations of representation in a manner that painting no longer could.     

钢包包衬侵蚀对内衬温度和钢水温降的影响

为了研究包衬侵蚀对钢水温降的影响规律,通过ANSYS有限元软件以及ParaMesh网格随移技术建立了考虑包衬侵蚀的钢包传热计算模型,研究并分析了包衬侵蚀对包衬及钢水温度的影响规律。结果表明,包衬侵蚀对包衬温度影响较大,在相邻两个修包周期内,包衬侵蚀造成渣线和包壁的包衬内部(工作层与永久层交界处)温差为14～114 K;包衬侵蚀导致包壳外表面温度升高,包壳向外散热增加,与此同时,包衬受侵蚀变薄,蓄热减少,两者同时作用导致包衬侵蚀对钢水温降影响不大,最高不超过1 K,在实际生产中可以适当地忽略钢包侵蚀对钢水温降的影响。     

一种提高油样中低含量石油磺酸盐分析效率的方法

为了准确分析油田化学驱采出液油样中石油磺酸盐的含量,介绍了一种在油样中加入不同极性溶剂组成的萃取体系的预处理技术,将石油磺酸盐萃取到水相,利用液相色谱仪对其进行检测的方法。取适量油样,依次加入正己烷、二氯甲烷、无水乙醇和蒸馏水,振荡均匀后静置分层,取下层水相溶液进行色谱分析。色谱柱为阴离子交换柱,流动相为甲醇/水和甲醇/盐水(含0.2 mol/L乙酸和0.2 mol/L乙酸铵),梯度洗脱。实验结果表明,该预处理技术联合液相色谱法检测技术分析效率较高,加标回收率高于90%,液相色谱最小定量限10 mg/L,线性范围10～2000 mg/L。该方法可对油样中低含量的石油磺酸盐进行快速定量分析。     

APP软件性能效率研究

性能效率是APP软件的重要质量属性，但目前缺乏APP软件性能效率的通用模型。分析了APP软件的性能特征，基于ISO/IEC 25010标准提出了APP软件的性能效率模型，定义了APP软件性能效率的子特性和度量指标。基于提出的APP软件性能效率模型，通过实验对APP软件的性能效率进行了度量及相关分析。     

基于PSO-ELM模型的潜油柱塞泵冲次优化方法

为改进油井后期泵效低下、能耗高等缺陷，提出了一种基于PSO-ELM模型的潜油柱塞泵冲次优化方法.采用粒子群（PSO）算法与极限学习机（ELM）相结合的方式来实现动液面软测量建模；根据动液面及潜油柱塞泵工作电流变化，以油井运行经济性最优为目的建立目标函数得到潜油柱塞泵冲次，解决了在油井生产时不能准确调节抽油机冲次问题；最后以目标函数关系建立模糊控制器模型，根据输入参数调整潜油柱塞泵冲次.实验结果表明，建立的软测量模型预测动液面精度高，模糊控制器能够更加合理地调整抽油机冲次，最终达到智能调整冲次大小、提高油井采油率及节能的目的.     

甲苯+乙醇+1-癸基-3-甲基咪唑醋酸盐物系等压气液相平衡数据的测定及关联

在常压下测定了甲苯+乙醇+1-癸基-3-甲基咪唑醋酸盐([C_(10)MIM][OAc])三元物系的等压气液相平衡数据,使用Aspen软件中NRTL模型对三元气液相平衡数据进行关联,通过计算得到方程参数。实验结果表明,[C_(10)MIM][OAc]的加入对甲苯有显著的盐析效应,[C_(10)MIM][OAc]摩尔分数越大效果越明显,当[C_(10)MIM][OAc]摩尔分数达到0.15时甲苯-乙醇的共沸现象完全消失。由NRTL模型计算出[C_(10)MIM][OAc]打破甲苯-乙醇体系共沸的最小摩尔分数为0.139 7。[C_(10)MIM][OAc]可以用作分离甲苯-乙醇共沸体系的萃取剂。     

Business intelligence and analytics use,innovation ambidexterity,and firm performance: A dynamic capabilities perspective

To survive in a dynamic and hyper-competitive business environment, firms are compelled to simultaneously introduce incremental and radical innovations. While it is recognised that business intelligence and analytics (BI&A) can support innovation and provide organisational value, the literature provides a limited understanding of its impact on balancing different innovation activities and ensuring performance gains. In this study, we examine the relationship between BI&A use, innovation ambidexterity, and firm performance by relying on the process theory of IS value creation as well as the dynamic capabilities perspective. We test our model using data collected from medium- and large-sized firms in Slovenia, applying partial least squares modelling. The results support the notion that BI&A use is positively associated with successful balancing between explorative and exploitative innovation activities, which in turn enhances firm performance. Our results also indicate that innovation ambidexterity is enhanced in two ways: indirectly through interaction with the firm’s absorptive capacity, and directly by increasing the possibilities of faster experimentation with offerings of products or services and improved predictability of the value of new products or services.     

电感耦合等离子体原子发射光谱法测定辛酸铑催化剂中铂钯铅铁铜铝镍

准确测定辛酸铑催化剂中杂质元素含量,是判定产品是否合格的重要指标之一。以往常采用直流电弧发射光谱法(摄谱法)进行检测,但测定周期长,且重复性较差。用电感耦合等离子体原子发射光谱法(ICP-AES)测定辛酸铑催化剂中微量杂质元素时,辛酸铑催化剂样品中含有的大量有机组分和铑基体会对测定有严重干扰。实验采用反复滴加硝酸消解样品中有机组分,再用王水溶解盐类,选用合适背景点扣除的方式消除铑基体的干扰,建立了使用ICP-AES测定辛酸铑催化剂中0.001%~0.1%(质量分数)Pt、Pd、Pb、Fe、Cu、Al、Ni等7种微量杂质元素的方法。各元素在0.10~10.00μg/mL范围内与其发射强度呈线性关系,相关系数均大于0.9999;方法检出限(μg/mL)为0.075(Pt)、0.0033(Pd)、0.015(Pb)、0.0036(Fe)、0.010(Cu)、0.001(Al)、0.012(Ni)。实验方法用于测定辛酸铑催化剂样品中Pt、Pd、Pb、Fe、Cu、Al、Ni,结果的相对标准偏差为(RSD,n=7)为1.4%~9.6%。按照实验方法测定辛酸铑催化剂中Pt、Pd、Pb、Fe、Cu、Al、Ni,并与直流电弧发射光谱法的测定结果进行比对,结果相一致。